Vertex Accessories

Product Details:

We are a well-known manufacturer and supplier of superior quality Punch Grinders. These grinders are put to use in the surface grinding process due to their effectiveness and ease of operation. Our offered grinders are specifically designed by professionals designers in compliance with latest quality norms. Moreover, these grinders are supplied in various configurations for catering diversified demands of customers.


Features:

• Superior strength
• High effectiveness
• Excellent finishing

Type 1: Mini-Type Punch Grinder
Order No.: V-pgs
Code No.: 2002-001


Details:

• Weight:4.5kgs
• Can grind punch of outside diameter from 1.5mm to 3mm.
• The accuracy of point A within 0.005m/m and point B Within 0.008m/m while turning.

Type 2: Standard- Type Punch Grinder
Order No.: V-pg
Code No.: 2002-010


Details:

• Can grind round punches up to 1.5mm-25mm.
• It can be ground by putting among three rollers of punch grinder, without checking the center.
• The accuracy of point A within 0.005m/m and point B Within 0.008m/m while turning.
• The accuracy of roller within 0.005mm while turning right or left.
• It can allow length 5-35m/m.
• Weight: 6.6kgs

Type 3: Punch Grinder with motor
Order No.: V-pgm
Code No.: 2002-020


Details:

• Can grind round punches up to 1.5mm-25mm
• High accuracy cylindrical grinding work possible just by putting this economical unit on a surface grinder.
• No center alignment necessary just put work on rollers.
• Portable with the single hand, thus easily on grinding.
• With rollers motor -driven attention can be concentrated on table/wheel feeds.
• Work can be formed in radius taper as well.
• Double roller unit available for the long pin or punch grinding.

Product Details:

We are reckoned amongst the clients for offering a wide array of Permanent Electro Magnetic Chucks. These products are highly demanded by the clients for their easy installation and strength. Our offered chucks are procured from highly acclaimed vendors who manufacture them in compliance with current industrial trends. We have with us wide specifications of these chucks for supply to customers as per their needs.

Features:

• Ensure higher magnetic and mechanical performances, as well as absolute reliability
• Owing to no power supply to keep the magnetic chuck ON, it could be used for long time and never get the temperature to affect the accuracy of a work piece. “COLD” device, not subject to internal wear or deformation resulting from moving internal parts
• Easy and convenient to clamp a work piece, shortens clamping time
• Most suitable for heavy duty machining on medium, large or even rough components
• Easily integrated with Pallet Change of Horizontal Machining Center and FMS System the Magnetic Chucks will be as geometrically stable as the table itself
• For the most powerful machine tools available. Systems are switched ON or OFF with a simple electrical pulse. A variable output from 20%-100% is controlled from the operator push button unit
• They are entirely independent of external power supply when holding work pieces. There is no risk when power fails.
• 2 seconds control for power ON & OFF. No electric power supply required keeping the magnetic chuck ON. Safety in case of power failure
• 10 mm minimum thin work piece & minimum 4 block magnetic pole for work piece
• Every work piece needs 3 transiting soft jaw to stabilize holding power

Product Details:

We offer wide range of Permanent Magnetic Lifters. Each size suit for plate type & round type steel using. All new models with light weight less dimension and lower price Vertex Make Permanent Magnetic Lifters are Made by permanent magnet, require, require no power supply, thus eliminating hazards due to failure wiring system as electric type.

 

Features:

• Quality approved
• Easy to use
• Affordable rates

Additional Information:

• Item Code: VML1000

Product Details:

HOW IT WORKS :

Just switching a key on the control unit you can operate:

- in “GRIP” mode to fix and remove the chuck form the machine table.

- in “WORK” mode, running MAG/DEMAG cycles to clamp/unclamp the workpiece.

Suitable for any machine

The chuck must be fixed by 2 through holes, standard supplied.The parking plate supplied with the system is essential for transport and installation. It canbe reused for moving the system and / or transfer to another machine.

Product Details:

We offer wide range of Stacker Semi Electric. Before passing to our clients, these equipments are tested on all parameters of quality and are accurately checked in compliance to the international industrial standards. Our offered electric stacker is highly acclaimed in the market due to its characteristics like minimum maintenance and unmatched quality.

Features:

• Low power consumption
• Precisely designed
• Optimum load bearing capacity